← Back to Assembly planning & process optimization

Optimize processes

3 min read

Shorter routes, lower costs, better processes#

In production, every move counts. Long distances, poorly placed work equipment or inefficient processes cost time and money. But traditional planning often requires a great deal of imagination or complex prototypes to identify problems at an early stage.

Halocline allows you to test, compare and optimize your processes directly in Extended Reality (XR) — without any physical models.

Here's how it works:#

1. Create a layout#

In Halocline, you can digitally build as many workstation variants as you like. With just one click, switch modes to test and analyze them in XR.

Two planning states side by side, A and B, as stages of a relocation.

2. Test your idea & make it tangible in XR#

Instead of just looking at numbers and tables, you can use Halocline to set up your planned process. Play through the process directly — with real routes, gripping movements and assembly steps.

Many users report:

“In VR, you really realize how long a three-meter running distance actually is — otherwise it's just a number.”

Inefficient distances or difficult movements are easy to spot and can be changed right away.

Labeled containers with parts at a workstation.

3. Record movements — make processes visible#

Every move counts. In Halocline, you can record the entire assembly process and visualize it. Time, location, distance, weight and component assembly are recorded automatically — without manual entries or complicated tables. This gives you valuable data that would otherwise only be available in complex planning programs.

Split image: man with an XR headset and controllers at a whiteboard, next to his assembly figure in 3D.

4. Play & analyze processes#

Like a video, all recordings can be played back in Halocline. In doing so, you can trace every single step, identify critical movements and identify bottlenecks. In addition, Halocline automatically generates gripping and walking routes, movement areas and ergonomic analyses that make your planning tangible and optimizable.

XR replay of an assembly at station 2 with timeline and visualisation options such as spaghetti diagram.

Analyze gripping and walking paths in 3D

Classic "Spaghetti diagrams" are a proven means of visualizing movement sequences. In Halocline, they become created directly in 3D. Every movement is traced exactly so that you can see where unnecessary paths arise and where processes can be optimized.

Two views of an assembly figure with a spaghetti diagram showing hand and head paths.
Make movement space visible

By displaying the movement space you see where employees mainly spend time during the assembly process. The top view allows you a direct comparison of different workplace variants to shorten distances and optimize processes.

Two workstations from above with the figure's movement space in purple, legend "Bewegungsraum".
Evaluate & improve ergonomics

Halocline automatically creates an avatar from the detected movements, which shows you where unfavorable postures occur. As soon as a hand goes above shoulder height or a person has to bend down low, this is highlighted. In addition, the software recognizes critically placed objects based on the guiding characteristic method so that you can optimize them in a targeted manner.

3D assembly figure with red and green body parts working at an assembly station.
Exporting & reusing data

The captured motion and object data can be exported with one click. In this way, the information can also be further analyzed outside of virtual reality or in other simulation and planning tools.

Hand pointing at a table of assembly steps and times on a monitor.

5. Iteratively improve processes#

As soon as you have identified optimization potential, you can switch back to the planning mode and adjust your layout. Short iteration loops ensure that you quickly find the best result.

Labeled containers with parts at the point of use.

Conclusion: Take planning to a new level#

With XR, process optimization Easier than ever. Instead of creating lengthy analyses, you test processes directly and automatically receives the relevant data for your decisions.